COPPERSTOP FIBRE OPTIC SENSOR
BURGLAR ALARM FOR COPPER CABLES

Thanks to the management software and the sensor cable in DCT f ibre optic, COPPERSTOP guarantees the protection of installed copper cables.

 

Key strengths:

  • Complete protection of cable ducts and shafts
  • Burglar alarm signal
  • Sure alarm signal
  • Advanced anti-tampering signal
  • Theft deterrent
  • Confuses thieves
  • Absence of false alarm signals thanks to the fibre optic sensor
  • Immune to EMI and RFI interference
  • Installation close to high tension energy conductors, it does not cause technical problems or requires special permissions
  • Not affected from vibrations and adverse weather conditions
  • 100% reliable alarm signal
  • Low cost solution

COPPERSTOPuses a MICMAR/2 micro-processor card whose software assesses the changes in the optic signal due to the mechanical manumission of the DCT sensor cable.
The shift in the light intensity signals the opening of shafts (irrespective of what material the cover is made from), the cutting of copper cables, the removal of copper cables in cable ducts.
COPPERSTOP can also be used as a protection for aerial cables.

 

MICMAR/2 micro-processor card
The card can be connected to alarm stations of any kind and brand via free contact.
Automatic setting of the optic signal.
DCT sensor cable that can be connected to the card: ranging from 5 to 1,200m.
No restrictions in the number of MICMAR/2 cards that can be fitted

 

DCT fiber optic sensor cable
DCT sensor cable has a plastic covering that makes it suitable for the installation on cable ducts and outdoors. Micmar technicians are at your complete disposal and able to recommend the most suitable cable configuration according to the installations that need protection.
The cable is supplied:
In reels that do not have a tube heading (in order to allow for the utmost freedom in connections)
In coils that have a tube heading and cut according to the need.

 

 

DCT CABLE TECHNICAL SPECIFICATIONS
Cable covering material: PVC, Kevlar, steel
Sensor: 850 nm fibre optic
Sensor average life span: 20 years
Working temperature: -40°C +85°C
Periodic resetting: not required
 
MICMAR/2 MICRO-PROCESSOR CARD TECHNICAL SPECIFICATIONS
Probability of detention (POD): 99%
False alarms (NAR): less than 1%
Annual calibration: not needed
Working temperature: - 5°C +70°C
Min/max tension: 10 – 14 Vdc
Reading capacity: 1.000/sec
Size: 50 x 90 mm
Relay contact: 1 Amp. at 12 Vdc resistive
Relay type: NO from 12 Vdc
Setting: automatic at start up and following an alarm signal
PATENT PENDING

 

 

 

Copperstop - Antifurto cavi in rame Copperstop - Antifurto cavi in rame Copperstop - Antifurto cavi in rame
     

 

 

Download  
brochure  
 Español   
Download  
brochure  
Français  
Download  
brochure  
Deutsch  
Download  
brochure  
English  
Download  
brochure  
Italiano   

 

 

Information:

Send an email to micmar@defspa.it
Federico Ciordinik sales manager